Toli Corporation

CANVAS FINE

Colourful cut-pile tiles with a soft canvas-fine finish.

A versatile 40cm square tile in a fresh, wide palette of 14 colours — from soft neutrals to mustard, denim blue, olive and terracotta. The surface feels notably soft underfoot yet cleans easily, and colours can be mixed within a single order to create patterns, borders or zoned spaces. Ideal for living rooms, bedrooms, home studios and quiet break-out areas.

  • Sound insulation: excellent
  • Stain-release
  • Antistatic
  • Flame-retardant
  • Low formaldehyde F★★★★
  • Self-adhesive backing

Tile Specification

Surface / dyeing
BCF Nylon 100%, cut pile · piece dyed
Base fabric
Nonwoven polyester
Backing
SOFT BACK Q — releasable self-adhesive
Tile size
400mm × 400mm
Overall thickness
9.0mm (pile height 5.0mm)
Coverage
10 tiles / box = 1.6 m² · 8.2 kg / box
Gauge / stitch
1/10 · 9.5 · yarn weight 18.9 oz/sq.yd
Installation
Quarter turn · no separate adhesive on most floors
Minimum order 31 boxes
Sold by the carton (colours may be mixed per order)
Manufactured 
Made in Japan, Toli Corporation

 

Request Samples, Specs & Project Support

Request a Sample

Item of interest: (ATTACK_270), CANVAS FINE

Your Details

Required fields are followed by *.

Build a Quote

Code: ATTACK_270

 — easy to lay, easy to lift - 

Because each tile carries its own releasable adhesive, you can install a whole room yourself with nothing more than a tape measure and a sharp knife — and lift it again just as cleanly when you move or refresh.

1 · Plan

Sketch a simple floor plan and decide whether to cover the whole room or lay a feature square in the centre (great for hallways and rugs too). Choose your colours — mix cut-pile tiles for borders or patterns — then total up the tiles and email us for a quote and samples.


2 · Install

Check the tile count in each box on arrival. Peel off the protective backing, then start from the centre lines of the room and work outwards to the walls in a quarter-turn pattern. Tiles cut easily with a utility knife to fit edges and around fixtures — no wet glue, no drying time.


3 · Pack down & reuse

The releasable SOFT BACK Q backing lets you lift tiles cleanly without damaging the subfloor. Swap a stained tile for a spare, rearrange your layout, or pick the whole floor up and take it with you — then simply re-lay it in the next room or home.


Handy tips

Always work from the centre of the room out to the walls so any cut tiles land evenly at the edges · keep a few spare tiles from your order for future replacements · store lifted tiles flat and stacked, adhesive-side down, so they’re ready to re-lay · lay pile direction using the quarter-turn method for the most even, forgiving finish.


Send us your tile count and colours — we’ll reply with a cost estimate and colour samples. Mix colours within a single order.

Request samples & a quote

EcoFloors Ltd · info@ecofloors.co.nz · +64 9 444 7353 · www.ecofloors.co.nz

Mixed colours AK2701 & AK2705