A high-end carpettile characterised by its soft woven texture
A versatile 50cm square tile in a fresh, wide palette of 12 colours — from soft neutrals to mustard, denim blue, olive and terracotta. The surface feels notably soft underfoot yet cleans easily, and colours can be mixed within a single order to create patterns, borders or zoned spaces. Ideal for living rooms, bedrooms, home studios and quiet break-out areas.
Surface / dyeing |
BCF Nylon 100%, cut pile · piece dyed |
|---|---|
Base fabric |
Nonwoven polyester |
Backing |
SOFT BACK Q — releasable self-adhesive |
Tile size |
500mm × 500mm |
Overall thickness |
10.0mm (pile height 5.0mm) |
Coverage |
10 tiles / box = 2.5 m² · 13.5 kg / box |
Gauge / stitch |
1/10 · 10.5 · yarn weight 26.5 oz/sq.yd |
Installation |
Quarter turn · no separate adhesive on most floors |
Minimum order 20 boxes |
Sold by the carton (colours may be mixed per order) |
Manufactured |
Made in Japan, Toli Corporation |
Request Samples, Specs & Project Support
— easy to lay, easy to lift -
Because each tile carries its own releasable adhesive, you can install a whole room yourself with nothing more than a tape measure and a sharp knife — and lift it again just as cleanly when you move or refresh.
Sketch a simple floor plan and decide whether to cover the whole room or lay a feature square in the centre (great for hallways and rugs too). Choose your colours — mix cut-pile tiles for borders or patterns — then total up the tiles and email us for a quote and samples.
Check the tile count in each box on arrival. Peel off the protective backing, then start from the centre lines of the room and work outwards to the walls in a quarter-turn pattern. Tiles cut easily with a utility knife to fit edges and around fixtures — no wet glue, no drying time.
The releasable SOFT BACK Q backing lets you lift tiles cleanly without damaging the subfloor. Swap a stained tile for a spare, rearrange your layout, or pick the whole floor up and take it with you — then simply re-lay it in the next room or home.
Always work from the centre of the room out to the walls so any cut tiles land evenly at the edges · keep a few spare tiles from your order for future replacements · store lifted tiles flat and stacked, adhesive-side down, so they’re ready to re-lay · lay pile direction using the quarter-turn method for the most even, forgiving finish.
Send us your tile count and colours — we’ll reply with a cost estimate and colour samples. Mix colours within a single order.
Request samples & a quoteEcoFloors Ltd · info@ecofloors.co.nz · +64 9 444 7353 · www.ecofloors.co.nz
