NS 800 Step, Integrated acoustic stair tread and landing sheet anti-slip floor material for outdoor and indoor use
Stylish Design Suitable for outdoors for Egress Stairs and corridors. Standard products of anti-slip vinyl floor sheet with versatile design and easy to use .
Available in standard widths :
Benefits:
Features:
Suitable For: Stairwwells, Corridors, Accessways, Balconies
TYPE A One-piece tread and riser |
TYPE B One-piece tread |
 |
|
| 5R - 7pcs/case - Thickness 2.5mm / Nosing radius 5mm | 10R - 10pcs/case - Thickness 2.5mm / Nosing radius 5mm |
ONE-PIECE STAIR TREAD & RISER INSTALLATION
Caution: For installations requiring stair tread nosing and risers to be scribed (non-overlapping stair tread nosing over vinyl risers),
Before applying the recommended Adhesive or Toli Nosing Filler Compound, the stair tread, riser and stringer’s entire backing must first be thoroughly cleaned with Denatured Alcohol (always follow manufacturer’s recommendations, cautions and warnings etc.) and a clean white cloth to remove the factory mould release agent applied during the manufacturing process, along with any other contaminates which could interfere with the bonding process. Once cleaned with Denatured Alcohol, allow backing to dry completely before applying recommended Adhesive or Toli Nosing Filler Compound and test to ensure a successful bond can be achieved.
For installations requiring one-piece stair tread and risers, scribe the tread and riser at the same time, utilizing the instructions noted under Individual Stair Tread and Riser Installations.
For one-piece stair tread and riser installations, use Cove Former Strip at the step/riser junction to ensure the proper bend of the riser portion of the tread. On the riser, use CRC F2 Multipurpose Contact Adhesive or Strongbond Brushable Contact 1 litre (always follow manufacturer’s recommendations, cautions and warnings etc.) contact adhesive for the adhering Cove Former Strip .
The recommended Adhesive or Toli Nosing Filler Compound must be used to install One-Piece Stair Treads and risers, which will depend on the type of stair tread installed and substrate.
To adhere stair treads vertical nosing to vinyl riser, first clean the stair treads nosing and vinyl riser with Denatured Alcohol (always follow manufacturer’s recommendations, cautions and warnings etc.) and a clean white rag and allow to dry completely. Ardex AF 180 MS One-Component Heavy Duty Adhesive is then applied covering the entire width and length of the stair treads vertical nosing. Secure stair treads vertical nosing with Painters Tape until Ardex AF 180 MS One-Component Heavy Duty Adhesive has dried. Remove Painters Tape before exposing to traffic. Do not use Ardex AF 180 MS over metal risers, Use Ardex AF 2525 & secure with Painters Tape until adhesive has fully cured. Remove Painters Tape before exposing to traffic. Quik-Stik Adhesive tape can also be used over metal risers.
On adjustable nose treads, either Ardex AF 180 MS or Ardex AF 2525 (always follow manufacturer’s recommendations, cautions and warnings etc.) can be used on the inside nose face and riser interface to secure the vertical nose at the proper angle.
Pre-cut and fit the treads prior to spreading adhesive. Scribe and fit treads to the proper step depth and length. Then thoroughly clean the stair tread vertical nosing and riser with Denatured Alcohol (always follow manufacturer’s recommendations, cautions and warnings etc.) and a clean white cloth and allow to dry. DO NOT use fans to expedite the drying of adhesive.
Contact ECOFLOORS for technical advice.
