TOUGHTECT 200mmx1200mm
Introducing "Toughtec" Luxury Hard Tile (LHT) by TOLI—a revolutionary vinyl tile that combines the resilience of ceramic tiles with the flexibility of vinyl.
"Toughtec" LHT is engineered to be as tough as ceramic yet easy to install, making it a versatile choice for any space. It boasts exceptional durability and stain resistance, ensuring your floors look pristine over time. Plus, it can be installed directly over existing hard floor coverings with the guidance of an ECOFLOORS expert.
One of"Toughtec" LHT's standout features is its beautiful finish, which effectively conceals imperfections in the subfloor. Despite its comparable thickness (3mm) and weight to traditional vinyl floor tiles, LHT offers enhanced functionality, making it a superior option.
In summary, LHT—Toughtec—is durable, lightweight, and aesthetically pleasing. Its design mitigates the impact of imperfect subfloors, and it requires less maintenance and is easier to install than ceramic tiles.
Specifications:
Experience the perfect blend of strength, style, and practicality with Luxury Hard Tile (LHT).
Required fields are followed by *.
Item of interest: (Toughtec_200mmx1200mm), Plank Formats
Enter in the measurements of your room
Code: Toughtec_200mmx1200mm
Before installation, make sure the arrow marks on the back of each tile, which show the direction of the pattern.
For one week after installation, direct sunlight, sudden change of temperature due to air conditioning, and water washing should be avoided.
The colour shading differs on a tile-by-tile basis, which will make the floor look very natural when the tiles are installed.
In case the sub-floor is not even, the tiles may not be firmly installed on it. Please check whether the sub-floor is flat and smooth in advance. If you find uneven parts, repair, and make it flat before installation.
For TOUGHTECHTILE, install the tiles a bit loosely, with a very slight gap between the tiles. In case they are installed tightly with no gap at all, the tiles might be swelled and popped up on the joints due to changes of temperature.
If you install TOUGHTECTILE on the top of existing ceramic tiles or vinyl tiles, their surface should be properly prepared in advance. For installation, use a moisture-resistant adhesive.
TOUGHTECTILE may take more time to be cut compared to existing vinyl tiles. Based upon a set time of the adhesive, plan the time frame for cutting and installation at the site.
No need to apply the maintenance wax on the surface. Clean the floor every day with an auto scrubber or a wet rag wrung out tightly. Use the neutral detergent for fixed contamination. The dirt on the bevelled part should be cleaned along its direction.
High speed buffing should be avoided. Otherwise highly durable UV coating will be abraded.
NW-EX Series is made to repel the wax coating. For wax application, the designated surface treatment should be prepared in advance.
At the entrance of the building, the dust control mat should be laid to avoid soils and sands from outside.
Please be aware that some rubber casters might cause colour-contamination.
Please note that the product has the indigenous odour from its materials.